Digital performance improvements of a CdTe pixel detector for high flux energy-resolved X-ray imaging

Risultato della ricerca: Article

19 Citazioni (Scopus)

Abstract

Photon counting detectors with energy resolving capabilities are desired for high flux X-ray imaging. In this work, we present the performance of a pixelated Schottky Al/p-CdTe/Pt detector (4×4) coupled to a custom-designed digital readout electronics for high flux measurements. The detector (4×4×2 mm3) has an anode layout based on an array of 16 pixels with a geometric pitch of 1 mm (pixel size of 0.6 mm). The 4-channel readout electronics is able to continuously digitize and process the signals from each pixel, performing multi-parameter analysis (event arrival time, pulse shape, pulse height, pulse time width, etc.) even at high fluxes and at different throughput and energy resolution conditions. The spectroscopic response of the system to monochromatic X-ray sources, at both low and high rates, is presented with particular attention to the mitigation of some typical spectral distortions (pile-up, baseline shifts and charge sharing). At a photon counting rate of 520 kcps/pixel, the system exhibits an energy resolution (FWHM at 59.5 keV) of 4.6%, 7.1% and 9% at throughputs of 0.9%, 16% and 82%, respectively. Measurements of Ag-target X-ray spectra also show the ability of the system to perform accurate estimation of the input counting rate up to 1.1 Mcps/pixel. The aim of this work is to point out, beside the appealing properties of CdTe detectors, the benefits of the digital approach in the development of high-performance energy resolved photon counting (ERPC) systems for high flux X-ray imaging.
Lingua originaleEnglish
pagine (da-a)54-62
Numero di pagine9
RivistaNUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT
Volume777
Stato di pubblicazionePublished - 2015

Fingerprint

Pixels
pixels
Fluxes
Detectors
counting
Imaging techniques
X rays
detectors
Photons
x rays
readout
photons
Electronic equipment
Throughput
energy
pulse amplitude
piles
Full width at half maximum
pulses
electronics

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Instrumentation

Cita questo

@article{a133bfcf88af41cf87782fa70fe8d31a,
title = "Digital performance improvements of a CdTe pixel detector for high flux energy-resolved X-ray imaging",
abstract = "Photon counting detectors with energy resolving capabilities are desired for high flux X-ray imaging. In this work, we present the performance of a pixelated Schottky Al/p-CdTe/Pt detector (4×4) coupled to a custom-designed digital readout electronics for high flux measurements. The detector (4×4×2 mm3) has an anode layout based on an array of 16 pixels with a geometric pitch of 1 mm (pixel size of 0.6 mm). The 4-channel readout electronics is able to continuously digitize and process the signals from each pixel, performing multi-parameter analysis (event arrival time, pulse shape, pulse height, pulse time width, etc.) even at high fluxes and at different throughput and energy resolution conditions. The spectroscopic response of the system to monochromatic X-ray sources, at both low and high rates, is presented with particular attention to the mitigation of some typical spectral distortions (pile-up, baseline shifts and charge sharing). At a photon counting rate of 520 kcps/pixel, the system exhibits an energy resolution (FWHM at 59.5 keV) of 4.6{\%}, 7.1{\%} and 9{\%} at throughputs of 0.9{\%}, 16{\%} and 82{\%}, respectively. Measurements of Ag-target X-ray spectra also show the ability of the system to perform accurate estimation of the input counting rate up to 1.1 Mcps/pixel. The aim of this work is to point out, beside the appealing properties of CdTe detectors, the benefits of the digital approach in the development of high-performance energy resolved photon counting (ERPC) systems for high flux X-ray imaging.",
author = "Gaetano Gerardi and Fabio Principato and Leonardo Abbene",
year = "2015",
language = "English",
volume = "777",
pages = "54--62",
journal = "Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment",
issn = "0168-9002",
publisher = "Elsevier",

}

TY - JOUR

T1 - Digital performance improvements of a CdTe pixel detector for high flux energy-resolved X-ray imaging

AU - Gerardi, Gaetano

AU - Principato, Fabio

AU - Abbene, Leonardo

PY - 2015

Y1 - 2015

N2 - Photon counting detectors with energy resolving capabilities are desired for high flux X-ray imaging. In this work, we present the performance of a pixelated Schottky Al/p-CdTe/Pt detector (4×4) coupled to a custom-designed digital readout electronics for high flux measurements. The detector (4×4×2 mm3) has an anode layout based on an array of 16 pixels with a geometric pitch of 1 mm (pixel size of 0.6 mm). The 4-channel readout electronics is able to continuously digitize and process the signals from each pixel, performing multi-parameter analysis (event arrival time, pulse shape, pulse height, pulse time width, etc.) even at high fluxes and at different throughput and energy resolution conditions. The spectroscopic response of the system to monochromatic X-ray sources, at both low and high rates, is presented with particular attention to the mitigation of some typical spectral distortions (pile-up, baseline shifts and charge sharing). At a photon counting rate of 520 kcps/pixel, the system exhibits an energy resolution (FWHM at 59.5 keV) of 4.6%, 7.1% and 9% at throughputs of 0.9%, 16% and 82%, respectively. Measurements of Ag-target X-ray spectra also show the ability of the system to perform accurate estimation of the input counting rate up to 1.1 Mcps/pixel. The aim of this work is to point out, beside the appealing properties of CdTe detectors, the benefits of the digital approach in the development of high-performance energy resolved photon counting (ERPC) systems for high flux X-ray imaging.

AB - Photon counting detectors with energy resolving capabilities are desired for high flux X-ray imaging. In this work, we present the performance of a pixelated Schottky Al/p-CdTe/Pt detector (4×4) coupled to a custom-designed digital readout electronics for high flux measurements. The detector (4×4×2 mm3) has an anode layout based on an array of 16 pixels with a geometric pitch of 1 mm (pixel size of 0.6 mm). The 4-channel readout electronics is able to continuously digitize and process the signals from each pixel, performing multi-parameter analysis (event arrival time, pulse shape, pulse height, pulse time width, etc.) even at high fluxes and at different throughput and energy resolution conditions. The spectroscopic response of the system to monochromatic X-ray sources, at both low and high rates, is presented with particular attention to the mitigation of some typical spectral distortions (pile-up, baseline shifts and charge sharing). At a photon counting rate of 520 kcps/pixel, the system exhibits an energy resolution (FWHM at 59.5 keV) of 4.6%, 7.1% and 9% at throughputs of 0.9%, 16% and 82%, respectively. Measurements of Ag-target X-ray spectra also show the ability of the system to perform accurate estimation of the input counting rate up to 1.1 Mcps/pixel. The aim of this work is to point out, beside the appealing properties of CdTe detectors, the benefits of the digital approach in the development of high-performance energy resolved photon counting (ERPC) systems for high flux X-ray imaging.

UR - http://hdl.handle.net/10447/149510

UR - http://www.sciencedirect.com/science/journal/01689002

M3 - Article

VL - 777

SP - 54

EP - 62

JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

SN - 0168-9002

ER -