Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices

Risultato della ricerca: Conference contribution

Abstract

During the last decades, biomaterials have been deeply studied to fabricate and improve coatings for biomedical devices. Metallic materials, especially in the orthopedic field, represent the most common materials used for different type of devices thanks to their good mechanical properties. Nevertheless, low/medium resistance to corrosion and low osteointegration ability characterizes these materials. To overcome these problems, the use of biocoatings on metals substrate is largely diffused. In fact, biocoatings have a key role to confer biocompatibility features, to inhibit corrosion and thus improve the lifetime of implanted devices. In this work, the attention was focused on Hydroxyapatite-Chitosan (HA/CS) and Hydroxyapatite-Polyvinylacetate (HA/PVAc) composites, that have been studied as biocoatings for 304 SS based devices. Hydroxyapatite was selected for its osteoconductivity due to its chemical structure similar to bones. Furthermore, Chitosan and Polyvinylacetate are largely used yet in medical field (e.g. antibacterial agent or drug deliver) and in this work were used to create a synergic interaction with hydroxyapatite to increase the strength and bioactivity of coating. Despite bio-coatings were obtained by different techniques, in this work, they were fabricated by galvanic deposition process that has different advantages, among which it does not require external power supply. It is a spontaneous electrochemical reaction in which materials with different standard electrochemical potential were short-circuited and immersed in an electrolytic solution. Electrons supplied by the anodic reaction at the less noble electrode flow to cathode where they oxidize the less noblest ions in solution. SEM, EDS, XRD and RAMAN were performed for chemical-physics characterization of biocoatings. Polarization and impedance measurements have been also carried out to evaluate corrosion behavior. Besides, in-vitro cytotoxicity assays have been done for the biological features.
Lingua originaleEnglish
Titolo della pubblicazione ospiteSurface Modification Technologies
Pagine153-158
Numero di pagine6
Stato di pubblicazionePublished - 2019

Serie di pubblicazioni

NomeKEY ENGINEERING MATERIALS

Fingerprint

Chitosan
Durapatite
Hydroxyapatite
Coatings
Corrosion
Bactericides
Orthopedics
Biocompatible Materials
Cytotoxicity
Bioactivity
Biocompatibility
Biomaterials
Energy dispersive spectroscopy
Assays
Bone
Cathodes
Physics
Metals
Ions
Polarization

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cita questo

@inproceedings{04fc6d0ee15e49d28ea9e905ecb34b62,
title = "Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices",
abstract = "During the last decades, biomaterials have been deeply studied to fabricate and improve coatings for biomedical devices. Metallic materials, especially in the orthopedic field, represent the most common materials used for different type of devices thanks to their good mechanical properties. Nevertheless, low/medium resistance to corrosion and low osteointegration ability characterizes these materials. To overcome these problems, the use of biocoatings on metals substrate is largely diffused. In fact, biocoatings have a key role to confer biocompatibility features, to inhibit corrosion and thus improve the lifetime of implanted devices. In this work, the attention was focused on Hydroxyapatite-Chitosan (HA/CS) and Hydroxyapatite-Polyvinylacetate (HA/PVAc) composites, that have been studied as biocoatings for 304 SS based devices. Hydroxyapatite was selected for its osteoconductivity due to its chemical structure similar to bones. Furthermore, Chitosan and Polyvinylacetate are largely used yet in medical field (e.g. antibacterial agent or drug deliver) and in this work were used to create a synergic interaction with hydroxyapatite to increase the strength and bioactivity of coating. Despite bio-coatings were obtained by different techniques, in this work, they were fabricated by galvanic deposition process that has different advantages, among which it does not require external power supply. It is a spontaneous electrochemical reaction in which materials with different standard electrochemical potential were short-circuited and immersed in an electrolytic solution. Electrons supplied by the anodic reaction at the less noble electrode flow to cathode where they oxidize the less noblest ions in solution. SEM, EDS, XRD and RAMAN were performed for chemical-physics characterization of biocoatings. Polarization and impedance measurements have been also carried out to evaluate corrosion behavior. Besides, in-vitro cytotoxicity assays have been done for the biological features.",
author = "Brucato, {Valerio Maria Bartolo} and Carmelo Sunseri and {La Carrubba}, Vincenzo and Rosalinda Inguanta and Isabella Mendolia and Claudio Zanca and Elisa Capuana and Giulio Ghersi and Salvatore Piazza",
year = "2019",
language = "English",
isbn = "978-303571525-5",
series = "KEY ENGINEERING MATERIALS",
pages = "153--158",
booktitle = "Surface Modification Technologies",

}

TY - GEN

T1 - Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices

AU - Brucato, Valerio Maria Bartolo

AU - Sunseri, Carmelo

AU - La Carrubba, Vincenzo

AU - Inguanta, Rosalinda

AU - Mendolia, Isabella

AU - Zanca, Claudio

AU - Capuana, Elisa

AU - Ghersi, Giulio

AU - Piazza, Salvatore

PY - 2019

Y1 - 2019

N2 - During the last decades, biomaterials have been deeply studied to fabricate and improve coatings for biomedical devices. Metallic materials, especially in the orthopedic field, represent the most common materials used for different type of devices thanks to their good mechanical properties. Nevertheless, low/medium resistance to corrosion and low osteointegration ability characterizes these materials. To overcome these problems, the use of biocoatings on metals substrate is largely diffused. In fact, biocoatings have a key role to confer biocompatibility features, to inhibit corrosion and thus improve the lifetime of implanted devices. In this work, the attention was focused on Hydroxyapatite-Chitosan (HA/CS) and Hydroxyapatite-Polyvinylacetate (HA/PVAc) composites, that have been studied as biocoatings for 304 SS based devices. Hydroxyapatite was selected for its osteoconductivity due to its chemical structure similar to bones. Furthermore, Chitosan and Polyvinylacetate are largely used yet in medical field (e.g. antibacterial agent or drug deliver) and in this work were used to create a synergic interaction with hydroxyapatite to increase the strength and bioactivity of coating. Despite bio-coatings were obtained by different techniques, in this work, they were fabricated by galvanic deposition process that has different advantages, among which it does not require external power supply. It is a spontaneous electrochemical reaction in which materials with different standard electrochemical potential were short-circuited and immersed in an electrolytic solution. Electrons supplied by the anodic reaction at the less noble electrode flow to cathode where they oxidize the less noblest ions in solution. SEM, EDS, XRD and RAMAN were performed for chemical-physics characterization of biocoatings. Polarization and impedance measurements have been also carried out to evaluate corrosion behavior. Besides, in-vitro cytotoxicity assays have been done for the biological features.

AB - During the last decades, biomaterials have been deeply studied to fabricate and improve coatings for biomedical devices. Metallic materials, especially in the orthopedic field, represent the most common materials used for different type of devices thanks to their good mechanical properties. Nevertheless, low/medium resistance to corrosion and low osteointegration ability characterizes these materials. To overcome these problems, the use of biocoatings on metals substrate is largely diffused. In fact, biocoatings have a key role to confer biocompatibility features, to inhibit corrosion and thus improve the lifetime of implanted devices. In this work, the attention was focused on Hydroxyapatite-Chitosan (HA/CS) and Hydroxyapatite-Polyvinylacetate (HA/PVAc) composites, that have been studied as biocoatings for 304 SS based devices. Hydroxyapatite was selected for its osteoconductivity due to its chemical structure similar to bones. Furthermore, Chitosan and Polyvinylacetate are largely used yet in medical field (e.g. antibacterial agent or drug deliver) and in this work were used to create a synergic interaction with hydroxyapatite to increase the strength and bioactivity of coating. Despite bio-coatings were obtained by different techniques, in this work, they were fabricated by galvanic deposition process that has different advantages, among which it does not require external power supply. It is a spontaneous electrochemical reaction in which materials with different standard electrochemical potential were short-circuited and immersed in an electrolytic solution. Electrons supplied by the anodic reaction at the less noble electrode flow to cathode where they oxidize the less noblest ions in solution. SEM, EDS, XRD and RAMAN were performed for chemical-physics characterization of biocoatings. Polarization and impedance measurements have been also carried out to evaluate corrosion behavior. Besides, in-vitro cytotoxicity assays have been done for the biological features.

UR - http://hdl.handle.net/10447/371002

UR - http://www.scientific.net/

M3 - Conference contribution

SN - 978-303571525-5

T3 - KEY ENGINEERING MATERIALS

SP - 153

EP - 158

BT - Surface Modification Technologies

ER -