Behavior Modification of Nanostructured PbO₂ Electrodes in Lead Acid Batteries Changing Electrolyte Concentration and Separator

Risultato della ricerca: Article


Currently, lead acid battery is extensively investigated owing to its prevalent use as a starting-lighting and ignition device. An essential role for electrochemical reactions is played by the surface area available for conversion reactions and a possible approach is the use of nanostructured electrodes. In this work, lead dioxide nanostructured electrodes were tested in order to investigate the dependence of the charge and discharge behaviour on some parameters such as electrolyte concentration, and a new type of thin separator. In this last case, it is possible to reduce the size of the cell by using a very thin separator comparable to the nanostructured electrode thickness. Besides, a low concentration of electrolyte was also tested for studying its influence on the performance of a nanostructured electrode. Lead dioxide electrodes were cycled at 1C-rate and discharged to a cutoff voltage of 1.2 V up to 90% of the gravimetric capacity. Electrodes were assembled in a zero gap configuration using a commercial negative plate as counter-electrode with a large excess of active mass in comparison to the nanostructured one. Tests were conducted in very stressful conditions, in order to compare the behaviour of this new type of battery with that of the commercial one.
Lingua originaleEnglish
pagine (da-a)7398-7403
Numero di pagine6
RivistaJournal of Nanoscience and Nanotechnology
Stato di pubblicazionePublished - 2020


Cita questo