### Abstract

Original language | English |
---|---|

Publication status | Published - 2016 |

### Fingerprint

### Cite this

*Multi-physical modelling of Reverse ElectroDialysis*.

**Multi-physical modelling of Reverse ElectroDialysis.** / Santoro, F.

Research output: Contribution to conference › Paper

}

TY - CONF

T1 - Multi-physical modelling of Reverse ElectroDialysis

AU - Santoro, F

AU - Ciofalo, Michele

AU - Cipollina, Andrea

AU - Micale, Giorgio Domenico Maria

AU - Tamburini, Alessandro

AU - Gurreri, Luigi

AU - Battaglia, Giuseppe

PY - 2016

Y1 - 2016

N2 - Energy extraction from salinity gradients (salinity gradient power, SGP) represents a novel and valuable renewable energy source. Among the existing SGP technologies, reverse electrodialysis (RED) is the oldest and one of the most promising. RED is a membrane-based electrochemical process that directly converts the salinity gradient energy into electric current. More precisely, in a RED unit two solutions at different concentration flow in two series of alternated channels, which are formed by piling two alternated series of cation and anion exchange membranes (CEMs and AEMs, respectively). The chemical potential difference between the two solutions generates an electric potential difference over each membrane along with a selective transport of cations (across CEMs) and anions (across AEMs) from each concentrate channel towards the two contiguous dilute ones. Eventually, the so generated ionic current is converted by redox reactions into an electric current in the two electrode compartments closing the stack. RED is characterized by a number of different physical phenomena, which should be properly modelled in order to drive the process design and optimization. In this regard, this work presents a novel approach for multi-physical modelling of the entire RED process. A single 2-D cell pair (encompassing two membranes and two feed channels) is the identified process repeating unit, coinciding with the computational domain investigated. In order to fully cover the phenomenological complexity of the operation of a RED unit, a number of different physical models were implemented and interconnected each other. In particular: (i) Navier–Stokes and continuity equations were solved for fluid dynamics modelling; (ii) Nernst–Plank equation was used for ion mass transfer; (iii) local electroneutrality condition was assumed everywhere, taking also into account the fixed charges concentration within the membranes. At membrane-solution interfaces: (iv) Donnan exclusion theory was applied to simulate voltage jump; (v) partition coefficients were adopted to simulate concentration jump. Finally, the model is completed by (vi) algebraic equations for the calculation of stack potential, current density and gross / net power density in a stack of any given number of cell pairs, by taking into account also the electrode compartments resistance and the external load variation. As model outputs, the distributions of velocity, pressure, concentrations, fluxes and potential in the overall domain were obtained, and the values of gross and net power density were computed. Different membrane/channel configurations were investigated, including flat membranes, either with or without non-conductive spacers, and profiled membranes. Moreover, the influence of the feeds concentration was evaluated. The model developed appears to be a promising tool for the optimization of RED units design and operation

AB - Energy extraction from salinity gradients (salinity gradient power, SGP) represents a novel and valuable renewable energy source. Among the existing SGP technologies, reverse electrodialysis (RED) is the oldest and one of the most promising. RED is a membrane-based electrochemical process that directly converts the salinity gradient energy into electric current. More precisely, in a RED unit two solutions at different concentration flow in two series of alternated channels, which are formed by piling two alternated series of cation and anion exchange membranes (CEMs and AEMs, respectively). The chemical potential difference between the two solutions generates an electric potential difference over each membrane along with a selective transport of cations (across CEMs) and anions (across AEMs) from each concentrate channel towards the two contiguous dilute ones. Eventually, the so generated ionic current is converted by redox reactions into an electric current in the two electrode compartments closing the stack. RED is characterized by a number of different physical phenomena, which should be properly modelled in order to drive the process design and optimization. In this regard, this work presents a novel approach for multi-physical modelling of the entire RED process. A single 2-D cell pair (encompassing two membranes and two feed channels) is the identified process repeating unit, coinciding with the computational domain investigated. In order to fully cover the phenomenological complexity of the operation of a RED unit, a number of different physical models were implemented and interconnected each other. In particular: (i) Navier–Stokes and continuity equations were solved for fluid dynamics modelling; (ii) Nernst–Plank equation was used for ion mass transfer; (iii) local electroneutrality condition was assumed everywhere, taking also into account the fixed charges concentration within the membranes. At membrane-solution interfaces: (iv) Donnan exclusion theory was applied to simulate voltage jump; (v) partition coefficients were adopted to simulate concentration jump. Finally, the model is completed by (vi) algebraic equations for the calculation of stack potential, current density and gross / net power density in a stack of any given number of cell pairs, by taking into account also the electrode compartments resistance and the external load variation. As model outputs, the distributions of velocity, pressure, concentrations, fluxes and potential in the overall domain were obtained, and the values of gross and net power density were computed. Different membrane/channel configurations were investigated, including flat membranes, either with or without non-conductive spacers, and profiled membranes. Moreover, the influence of the feeds concentration was evaluated. The model developed appears to be a promising tool for the optimization of RED units design and operation

UR - http://hdl.handle.net/10447/191696

M3 - Paper

ER -